2 set 3 axles 40ft flatbed semi trailer ready ship to Brazil

2 set 3 axles 40ft flatbed semi trailer ready ship to Brazil,this client find us through his friends.

The brake pads of the flatbed are consumables. They will wear out gradually during use. When they are worn to the limit position, they must be replaced. Otherwise, the braking effect will be reduced and even a safety accident will occur. Brake pads are critical and must be treated with caution. Most cars use front and rear drum brake structures. Generally, the front brake shoes wear faster, and the rear brake shoes use brake pads.

The time is long, and the following aspects should be noted in daily inspection and maintenance:

1. Check the brake shoes once every 5,000 km under normal driving conditions. In addition to checking the remaining thickness, it is also necessary to check the wear state of the brake pads, whether the wear on both sides is the same, whether it is free to return, and the abnormal situation must be dealt with immediately. 

2. The brake pads are generally composed of two parts: a mountain iron lining and a friction material. Do not wait until the friction material parts are worn before replacing the shoes.

3. When replacing the brake pads, replace the brake pads provided by the original spare parts. Only in this way, the braking effect between the brake pads and the brake pads is best and the wear is minimal.

4. When replacing the brake pads, the brake pump must be pushed back with a special tool. Do not press back with other crowbars, which will easily cause the brake clamp guide screws to bend and catch the brake pads. 

5. After replacing the brake pad, you need to step on the brake pad foot to eliminate the gap between the shoe and the brake pad, which causes the first step on the foot without the brake pad.

6. After replacing the brake pads, it is necessary to wear the brake pads within 200 km to achieve the best braking effect. Newly replaced brake pads should be driven with care.